GADGETS

Infuser
What you need:
Water filter housing, beer disconnect x 2, keg ball lock post, 1/2" pipe tread to barb tail (to suit your beer line), a length of beer hose, about 8" high pressure black poly, a piece of 1/2" silicone hose and a wine cork.
Refer to the pictures below (click on them):
1. Fit your ball lock post and barb tail to the housing lid using telon tape. 2. Cut a bit of 1/2" silicone hose to fit inside the black poly and the housing lid. 3. Measure and cut the black poly allowing for the wine cork. 4. Drill right through the black poly pipe 4 holes using a 5/32" drill. 5. Assemble with good stuff inside. Could be anything. In this case chillies. I found 2 dried cayenne peppers, split open and seeds removed proved to be perfect for my Avery IPA. 6. Connect to keg and enjoy.