2.0 System Requirements
Go to the Table Of Contents, go back to 1.0 Introduction or go forward to 3.0 Installation.
2.1 Hardware requirements
- any colour capable Macintosh computer or compatible. Essentially, any Mac with a 68020, 68030, 68040 or PowerPC series microprocessor. You do not need to have a colour screen.
- at least 1 Mb of free memory
- a network connection, which can consist of any of the following:
- a SLIP or PPP connection to any internet service provider or equivalent
- a LocalTalk or EtherTalk connection to an IP gateway
- an Ethernet connection to either a TCP/IP network or some kind of TCP/IP gateway
2.2 Recommended hardware
- at least 2 Mb of free memory (if you open several connections at the same time)
- a PowerBook (640 x 400) or 14" monitor (640 x 480) or better. Better yet, two monitors :-)
2.3 Software requirements
- EITHER System Software 7.0 or later with the Thread Manager 2.1 or later extension OR MacOS 7.5 or later (which has the Thread Manager extension built-in).
- Appearance Manager 1.0.3 or later. (for Pre-MacOS 8.1 users) <ftp://ftp.apple.com/developer/Development_Kits/Appearance_SDK_1.0.4.sit.hqx >
- Open Transport 1.1.1 or later.
- if you are using a modem to connect to the internet, you should have the appropriate network software installed for SLIP or PPP access, for example, "MacPPP", "FreePPP" or "Open Transport/PPP 1.0".
- Internet Config 1.3 or later when using pre-MacOS 8.5 (included in this package)
2.4 Recommended software
2.5 Compatibility
There are currently no known incompatibilities with NetFinder.
If you suspect any other incompatibilities, please contact the authors about it. We will try to find a solution if it is possible.
Go to the Table Of Contents, go back to 1.0 Introduction or go forward to 3.0 Installation.
Copyright © 1997-2000, Peter Li and Vincent Tan.