Metallurgical Testing & Consulting Engineers
Silverdale NSW 2752
(Near Warragamba Dam -Covering Sydney Metro)
Phone: (02) 4774 1017
Mobile (Stephen Hooker): 0419 498 115
We offer the following extended services:
METALS & ALLOYS
Tensile tests on sheet, flat or round specimens (Limit 50 kN.) (with manual strain rate control).
Guided bend tests.
Nick Break tests on weldments.
Macroscopic examination of weldments.
Brinell Hardness to 3,000 kg. (29.4 kN)
Rockwell Hardness using A, B and C Scales.
Vickers Hardness - Load 1 kg. to 30 kg. (9.8 to 294 N)
Micro Hardness using Vickers indentor - Load 10g to 1 Kg.
Compression, Transverse and Shear tests (Limit 50 kN)
Tension tests - Breaking load tests, limited to 50 kN
Proof tests and Stripping tests.
Metallographic Tests (with magnification to x2000)
Depth of case on carburised and nitrided surfaces
Depth of decarburisation
Depth of induction or flame hardened layer
Macroscopic examination of wrought products
Depth of surface defects
Non-metallic inclusion content
Graphite type and distribution in cast irons
Flexural Strength, and Modulus
Tensile Strength, and Modulus
Shear Test on bonded specimens
Hardness - Barcol
Long Beam Flexure test
Lap Shear Test
T-Peel Peel Tests
Hardness test – Shore D
METALLIC & CONVERSION COATINGS
Thickness tests on Metallic and Non Metallic coatings by Microscopic Methods.
Field portable XRF analysis of ferrous and non-ferrous metals
Magnetic particle testing of ferrous components – visible and fluorescent
Liquid penetrant testing of metals – visible and fluorescent
Ultrasonic testing of components – flaws and thickness
Eddy current testing of metallic components – flaws and electrical conductivity
Radiographic testing of metallic components – interpretation of radiographs
Strain gauge analysis
Call Stephen Hooker to address your specific requirements on (02) 4774 1017, or mobile 0419 498 115.
AUTOMOTIVE TESTING & SERVICES | CONTACT US | CRACK TESTING | CRYOGENICS | DRAG BIKE | FAILURE STATISTICS | LINKS | METALLURGICAL SERVICES | MISC SERVICES | PEEN REPORT | PROJECTS | SIDECAR RACING | JEDI RACING | SHOT PEENING
This page last updated: 22/11/11