GROUP 10 SEDAN SPECIFICATIONS

Race Duration -
-Qualifying                1 minute/no byes
-Consie                   2 minute brackets/1minute lane change
-Heats                      2 minute brackets/1 minute lane change
-Quarter Final          2 minute brackets/1 minute lane change
-Semi Final               2 minute brackets/l minute lane change
-Final                        3 minute brackets/2 minute lane change

Body – Outisight 050 Dodgit Stockcar

Chassis -
Any Parma, Taiwan, Racer, Champion, JK or Slotworks pressed steel Group 10 typechassis may be used. All original dimensions, mounting points and basic configuration must be retained with the following exceptions.
-Plating may be removed to facilitate soldering of chassis parts.
-Rear axle tube and/or wire motor brace may be added.
-Motor may be soldered in position.
-Rear axle height may be altered providing no material other than plating is removed from chassis
-Body tape may be used to aid chassis performance
-Front axle may be soldered in place or braced with wire to prevent rotation.
-Maximum front axle diameter - .062"
-Front wheel retainers may be substituted and/or soldered in place.

Rear Axle -
- 1/8th Solid only
- Oilite type bushings only, may be soldered or glued in place.

Gears -
Any unmodified 48D.P. Gears
Pinion size restricted to 8 or 9 teeth only.

Motor - Parma Sealed Super 16d motors are Handed out                  90 minutes before racing

Return