Rob's rust-free alfa page - guaranteed

There are 3 screws, 2 of which aim the lamp. The screw near my hand (ie top and inside) holds the lamp in place. The outer top and lower screws adjust the beam, so don't move 'em, or if you must move 'em at least count your turns accurately and screw them back the same number. A spring clip also holds the outer, top adjusting screw in place. Yes, you must unclip that. You then pivot the unit gently out from the body and up. There's a "prong" on the unit that fits into a hole behind the lower screw. It locates the headlamp unit in place. Job done!

Labels: GTV, Headlamp, Tipo 116

OK, I got it out and got the rubber boot off as well. The boot was tough to shift and I was worried about tearing the "tabs" that I pulled on. Make sure it goes back on properly, to keep the weather out.

3 screws matter. Top left screw (left as in the picture) holds everything in place. Top right adjusts (or aims, if you prefer) the headlamp, as does the bottom screw. Don't move these, or if you do ensure you set then as they were. There's a clip on the top-right screw that holds the lamp. And the bottom screw conceals a hole into which the lamp unit sits via a locating "prong".  

It's the lowbeam that blew, the centre single-spade connector. The other connector is for the parking light. I changed that 10 years ago so it should be fine ;-)

Labels: GTV, Headlamp, Tipo 116

Just before annual registration time, of course. It's a common and simple task, really, but also it's the first time in 10 years So I had to remember all over again how to do it... it's clear that you can't access it from behind, so it must come off from the front.

So here are a few pics on the subject of removing and replacing a 1982 GTV (Aussie spec) halogen headlamp. Bear in mind this is a low beam unit with parking light - not a sealed beam. I think the sealed beam unit fits on and is aimed in the same way though.

Labels: GTV, Headlamp, Tipo 116

This just keeps bringing back memories. What a great car the Giulietta was... barely different from the Alfetta sedan, sort of a wedge-shaped interpretation of the 116 platform. Not quite an Alfetta, not yet a GTV. In between. If I collected Alfas in a parallel fashion (rather than serially) I'd have one of these again. (But not the plastic-coated 2.0 version.)

The Mi.To looks great, and is at long last the right size: ie, not a luxo-barge. There's an interesting read behind this link:Martinelli left F1 at the end of 2006, specifically to head up Fiat’s engine department. As such, he’s had a winning hand in Alfa Romeo’s new peach of a petrol plant, a lively lag-less little 16-valve 1.4-litre turbo that also does duty in the Fiat Grande Punto and Bravo, albeit with 4 kW less than Alfa’s 114.

Just beware, it's full of idle rubbish like: Let’s face it: Alfa is not what it used to be. With the exception of the 159, 156, Giulietta and a handful of Quadrifoglio or GTA models, the brand has sadly been scarred over the last 30 years by a long and steady decline.

Obviously not a fan of the amazing Alfasud sedan, ti and Sprint Veloce, the wolf-in-sheep's clothing Alfetta sedan, the Alfetta GT and GTV, the GTV6, the lovely Nuovo Giulietta, the 75 (AKA Milano), the 33ti or almost anything since! OK, the ARNA was a bit sad, and the 145 wasn't all that it could have been, but honestly...! ALFA Romeo must surely wonder what they have to do... isn't the latest crop, the 147, 156, 159 and Brera enough?

Apparently not. Most shocking of all was to find that Alfa had gone soft since its brief mid-’90s renaissance. Steering got dopey, gearchanges sloppy and ride mushy.. "Dopey" steering must refer to the 147's turning circle, not sure what else it could be. Sloppy gearchanges? Has this guy driven a rear-transmission Alfa? That is sloppy. And a mushy ride? Alfas soak up the bumps, and roll. Not as bad a French car, but obviously so. Only the hardened-edge of the GTAs truly eliminates the bodyroll and high-speed comfort of the classic Alfa. Yet they still run fast and corner hard. That is the essence of it.

I can remember swapping from a stiff-as-a-post Ford Escort with "Rally Pack" to a stock 1982 Giulietta and being amazed at the body roll. It put me off until I realised I was going 5-10kmh faster around sharp corners in the dry, twice that in the wet -and much faster again over bumpy roads that I had previously had to slow down on... simply a better suspension setup.

Yet most people when given a car to drive are clots and clods with no finesse and can't see or feel what they have... which is why we shouldn't trust anyone else's opinion, certainly not mine, just your own.

Labels: Alfetta, Ford Escort, Mi.To

Maybe this will work? Sharing some components with BMW's MINI makes sense, in fact it's high time the car industry woke up and realised it needs to rationalise all of the wasteful duplication of components, including engines. Some 'sharing' goes on at the supplier level already, and some also happens within a multi-brand company - Ford switchgear in an Aston, for example, or various components shared between VW Group products. But it needs to grow much faster in order to cut out waste and remove the carbon emissions that plague this industry.

WHAT do you get if you cross a Mini with an Alfa Romeo? No it's not a joke, Mini owner BMW really is joining forces with Alfa Romeo maker Fiat to build cars together.

We just don't want another ARNA debacle, Alfa Romeo ;-)

Labels: Alfa, ARNA, BMW, MINI

My all-time 3rd most popular photo on Flickr! And it's just the rear end of a production coupe... not a supercar or something rare at all.

Anyway it's a look underneath my 1982 Alfetta GTV showing the rear mounted transaxle, de Dion tube, Watts linkage and inboard disc brakes. Most cars of course don't have de Dion tubes, so that's a bit special. The Watts linkage is more common. The rear mounted transmission is much more rare and gives the car better weight distribution (ie 50:50) and a polar moment of inertia that lends the car stability rather than twitchiness.

The inboard brakes are also unusual on a road car, but were an Alfa specialty in the late 70s and throughout the 80s, both with their rear and front drive cars. On this car it meant that even the rears could overheat a tad on mountain descents... but OTOH the rear wheels didn't have to carry the extra unsprung weight so an Alfetta could menace much more powerful cars around corners. (The Alfasud from this era had inboard front brakes, which probably worked better than the Alfetta's rear brake arrangement and helped to make the 'Sud a great handler - but suffered from the occasional accidental ill-placed drop of engine oil... ooops.)

• Not a lot of Alfa content, but just enough to satisfy, and a great pictorial blogpost focused around Mugello...."Aloha and Welcome to *Liam's Wild Ride* , the Official Website of Liam Shubert. This is the chronicle of my travels, adventures, and experiences while I'm busy working in MotoGP! Please enjoy the places, faces, and especially, the Races!"
• An Alfa Montreal 'company car'? And a secret test track (not!)
  
• Oh please no, Alfa, don't do it..."Alfa will built its first SUV : the Alfa Romeo 149 SUV
  The new project will come alive in 2010 and it will be in the same class as the Audi Q5, Mercedes GLK and Volkswagen Tiguan. The 149 SUV will be a sporty car with the Alfa branded design. The engine is thought to be a 2.0 l 300 hp engine"
• In 2 minds - a Brera ruined or improved? "Prodrive decided that while the Alfa Romeo Brera was an excellent supercar in its own right they would be able to turn it into perfection. Thus was born the Alfa Romeo Brera S."
• We'll believe it when we see it: Marchionne believes the only way to sell Fiats profitably in the U.S. is to build them in North America. He said he's "having discussions with everybody," though he also didn't rule out building a factory. While Fiat has an existing partnerships with Ford (F), another potential alliance partners is Mercedes-Benz (DAI), which is interested in building passenger cars in North America in addition to the SUVs it builds in Alabama. Nissan (NSANY) has excess plant capacity at its Mississippi plant, and seems interested in replacing some of the SUV capacity it has there with passenger cars. Fiat already shares engineering with Ford on the U.S. automaker's Ka minicar in Europe. Ford is expanding its small car manufacturing in Mexico to build the Ford Fiesta, and would also be a logical partner.
• Everyone wants to know us now: "GM, the UAW, state and local government should take the initiative to begin a dialogue with Alfa's parent company, Fiat. Fiat already does business in Wisconsin with its Case-IH business in Racine. State tax and development incentives should be offered to secure the Alfa factory and align with this premium global brand. A Janesville Alfa Romeo plant could be a high-tech infused facility with a forward-thinking, attractive product -- but the city and state will have to lobby for it, and not a moment should be wasted." But GM and FIAT, again? This guy has no understanding of recent history. eh?
• How about Canada then? "With bad news of auto plant closures spreading across the province, Queen's Park retains a glimmer of hope that Ontario is in the running to land an Alfa Romeo factory. Minister of Economic Development and Trade Sandra Pupatello called a May 21 meeting in Turin, Italy, between Premier Dalton McGuinty and executives from Fiat, Alfa Romeo's parent company, a positive step."
• And lastly, the MiTo photoshoot and a cabrio...
  

Labels: Alfa, links, Mi.To, Mugello, US

My Giulietta at Oran Park, NSW, Australia in 1982. Nice understeer... It's an Alfa Romeo Owners' Club event, probably a lap dash. If you don't know BP corner then you haven't lived. Basically you come hurtling out of some fast bends, go down into a ditch, come up and go hard left into a long straight. So you've picked up some speed, bottomed and released the suspension and then chucked it left into understeer territory. You can see how the rear wheels remain planted square to the road by the deDion tube and the fronts are trying to get the car around the bend... and not into the wall.

Once out of BP you pick up speed (on the GP circuit) and the 1.8 litre Giulietta was good for 160km/hr (in my hands) by the kink. Then hard braking, hard left, mind the concrete wall all over again and into the twisties.

There's a bit of cheating here - it's an '82 2.0 GTV with tan interior but with an '84 model's chocolate faux-Recaro "mesh" seats and side panels in the doors. The original seats had headrests on a sliding laminated wooden "slat" - you'd know it if you saw it! Anyway these seats have the "mesh" insert into the headrest. It's a Momo steering wheel seen here of course, but the car came with a wooden-rimmed example that was just too large (but made turning effort more manageable). The leather gear knob is Momo as well, replacing the chunky wooden number so many Alfas had back then...

A startling little story about a car that should be in a museum but has been restored in NZ and is being 'looked after' in Australia..This month Mr Anderson, a plumber by trade, was asked to look after a 1932 Alfa Romeo, a car which once dominated racing, winning 28 Grand Prix races including the 1932 Italian, French and German Grands Prix. The slim-line eight-cylinder car, which carries a price tag of $4 million, was once road tested by a young Enzo Ferrari before he went on to form the company which bore his name. Mr Anderson has been keeping the vintage car, owned by British millionaire Peter Giddings, finetuned for demonstrations at this year's Grand Prix and Phillip Island races, with a last appearance scheduled at next month's Historic Winton race in Benalla.

It looks like a P3, and the description fits, so I'll assume that to be the case. More on the P3 here:
The P3 was first genuine single seater racing car, and was powered by a supercharged eight cylinder engine. The whole car weight just over 1,500 lb (680 kg), very light for the period. Had it not been for the engine block being cast in iron the car would have been even lighter. The P3 was introduced in June 1932, halfway through the European season, winning its first race at the hands of Tazio Nuvolari, and going on to win 6 races that year driven by both Nuvolari and Rudolf Caracciola, including all 3 major Grands Prix in Italy, France and Germany. 1933 brought financial difficulties to Alfa Corse so the cars were simply locked away and Alfa attempted to rest on their laurels. Enzo Ferrari had to run his breakaway 'works' Alfa team as Scuderia Ferrari, using the older, less effective Alfa Monzas. Alfa prevaricated until August and missed the first 25 events, and only after much wrangling was the P3 finally handed over to Scuderia Ferrari. P3s then won six of the final 11 events of the season including the final 2 major Grands Prix in Italy and Spain.

Labels: Enzo Ferrari, Ian Anderson, P3, Peter Giddings